MCC panel is a group of starter that control different motors on different frequency. While a PCC panel is a group instrument of switches that distribute the electrical power. In most MCC and PCC panel manufacture combine the starters and switches that panels are designed as PMCC.

Motor Control Centre Panel (MCC) provide the most effective method for grouping electrical motors. Essentially, they’re an assembly to regulate electrical motors. We don’t compromise anything below perfections. We design and manufacture MCC Panel’s that have the capacity to feed sufficient loads, designed as per clients’ specifications and complying to IS/IEC Standard.

Types of MCC Panel

• Standard MCC Panels with remote operation
• Draw Out type MCC Panels
• Dual Starter Panels
• Autotransformer Starter Panels
• VFD(AC drive) Control panels

MCC panel also is known as Motor Control Centre Panel because it can control the control power source. Similarly they are designed as per IS standard IS 8623, IEC 60529. In addition, accupanels provide high quality and reliability.

All switches and the circuit breakers, connectors conformed to IEC60947, part I, II and III/ IS 60947 part I, II and III. Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Accu-Panels manufacturing the MCC Panel with a high standard of quality and reliability. As a result, Accupanels is a top 10 electrical panel manufacturer. LT panels are designed with rated current ranging from 100A to 6300A and up to 65KA and 80KA fault level.

All the Panels with metal clad, totally enclosed, rigid, floor mounted, air-insulated, cubical type suitable for operation on three-phase / single phase,415 or 230 volts, 50 Hz. The panels will be designed for the minimum expected ambient temperature of 45 degrees Celsius, 80 percent humidity, and dusty weather.

Firstly, all indoor panels have the protection of IP54 or better even more all outdoor panels will have the protection of IP65 or better. Secondly, all MCC Panels are made by laser cutting CRCA sheet and powder coating with the 7-Tank process.

Additionally, all Our LT panels having undergone pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all LT panels Painted with Powder Coated or Synthetic enamel as per the requirements. After that, seven tank processes made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross-section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along with the Panel. In Conclusion, MCC panels are an important aspect of electrical control panels and LT panels.